Cookie Settings

You can decide separately for each purpose. You can change your choice at any time from this panel, or withdraw it altogether.

Strictly necessary cookies

Those needed for the site to work and to be secure. Only the record that remembers your cookie choice and protection against attacks go in here. These are not used for marketing and cannot be switched off.

First partyozkoc_riza · 12 months

Analytics and measurement

How many people came, which pages were read, where visitors arrived from — to measure what the site does well. It does not identify people by name.

Third partyGoogle, Yandex12 months at most

Advertising and retargeting

So that, if you have visited our site, you can see our promotions on social media. No one else’s advertising is shown to you on this site.

Third partyMeta12 months at most

Session recording and heatmaps

To see where on the page people clicked and how far they scrolled. What you type into forms is not recorded — the contents of the quotation and service forms are masked before recording.

Third partyMicrosoft, Yandex12 months at most
ENEnglish
Request a Quote

Hydraulic Press Manufacturer · since 1964

not just presses,

From 70 to 7,000 tonnes; with deep drawing, forming, cutting and hot presses we produce sound solutions for demanding processes. The pioneer of hydraulic press manufacture in Turkey.

Our solutions
About Us

We do not just build presses — we deliver solutions.

Founded in İstanbul in 1964, ÖZKOÇ builds hydraulic presses at its Hadımköy factory for customers on 5 continents — from die design to PLC software, under one roof.

0 t
Maximum press tonnage — the range starts at 70 t
0
Continents with active exports
Hydraulic presses lined up in the ÖZKOÇ Hadımköy assembly hall

Under one roof

Design, frame manufacture, hydraulic and electrical assembly, software and commissioning — all of it within ÖZKOÇ’s own teams. Requests specific to a process are not a “deviation from the standard” but a design input.

DesignWelded FrameHydraulicsPLC / HMICommissioning

R&D Centre

Approved by the Ministry of Industry and Technology. The story began in 1975 with a prefill valve developed in-house.
0 m²
Hadımköy plant — 10,000 m² of covered area
ISTANBUL
5 continents with active exports
ISO 9001:2015Quality Management SystemCEEuropean conformity markingR&D CentreMinistry-approved

Quality is proven before delivery

  1. 01

    At design

    The frame and bolster calculations are verified before manufacture begins; the critical dimensions are fixed at the design stage.

  2. 02

    In manufacture

    Because the welded frame and the machining are done in our own workshops, intermediate inspection is not handed over to a supplier.

  3. 03

    At acceptance

    Before delivery the press is run in our own plant and tested against its tonnage, stroke and cycle figures.

Automotive·Defence Industry·Cookware·Metalworking·Construction & Building·Medical & Healthcare·Electrical & Energy·Automotive·Defence Industry·Cookware·Metalworking·Construction & Building·Medical & Healthcare·Electrical & Energy·
Ali Şükrü Koçan, construction of the Güneşli factory, 19781945 → 2026From an apprentice in Karaköy to three generations of press buildingThe story of founder Ali Şükrü Koçan, in ten stops — with photographs from the archive.
From the field

Presses at work.

Footage of the presses we build on real production lines: automatic feeding, transfer lines, deep drawing and hot pressing. Tap the cover and the video opens here.

  • POWDER COMPACTING HYDRAULIC PRESS

  • MULTI-STATION HYDRAULIC TRANSFER PRESS

  • Hydraulic Forming Press & OZKOC

  • FULLY AUTOMATIC DISC LOADING AND UNLOADING HYDRAULIC FORMING PRESS

  • Automatic Filter Production with a Fast and Effective Transfer Press

  • Fire Extinguisher Deep Drawing

  • Enamel Pot Production Line

  • DOME PRODUCTION SYSTEM - TESY BULGARIA

  • Enamel Pot Sheet Stamping Transfer Press From Disc to Coating

  • Automatic-feed bulging - flange trimming - curling line

  • Özkoç 400 tonne Hydraulic Rubber Vulcanising Press

  • Özkoç - Automatic Servo Driven Trimming Beading Machine

  • ÖZKOÇ Composite press for ballistic applications

  • 3000 Tonne Hydraulic Coining Press

  • Stainless Steel Sink Production - Özkoç Hidrolik Makina

  • Wheelbarrow production - Özkoç 400 Tonne Monoblock Hydraulic Deep Drawing Press with Easy Die Loading System

  • Özkoç Hydraulic Polyurethane Press

  • Hydraulic Glass Mosaic Press - Özkoç Hidrolik

  • Özkoç Hidrolik Makina - Deep Drawing Press - Flange trimming machine

  • Rebar coining press

  • Özkoç Hydraulic T-Fitting Press

  • Özkoç Hidrolik - Transfer Press - Automatic pot production

  • Özkoç - Automatic High-Speed Deep Drawing Press - Automatic Teflon pan manufacture

  • Özkoç Hydraulic Transfer Press - Kettle production

  • Özkoç Hydraulic Transfer Press

  • Özkoç - High-Speed Hydraulic Deep Drawing Press

  • Filter housing production - Özkoç Hidrolik triple-action double drawing press

  • Özkoç 250 Tonne Hydraulic Melamine Press

  • Özkoç - Hydraulic Composite Press

  • Özkoç Hydraulic Transfer Press - Turkish coffee pot manufacture

Our YouTube channel · 30 videos
After Sales

When the press is delivered, the job is not over.

The economic life of a hydraulic press runs to decades. We commission the presses we build on site, train the team that will use them, and meet maintenance, breakdown and modernisation requests throughout the life of the machine.

Request Service
  1. 01CommissioningInstallation of the press on site, checking of the hydraulic and electrical connections, and running it under production conditions.
  2. 02Operator trainingOn-site training for the team who will use the machine, covering operation, setting and safety rules.
  3. 03Breakdown responseOn notification of a stoppage, our technical team responds remotely or on site.
  4. 04Overhaul and modernisationRenewal of the hydraulic, electrical and control systems of older presses that are still in service.
  5. 05Spare partsSupply of original parts specified in the press’s own project.
  6. 06A solution for an existing machineEven if the press on site is another manufacturer’s, we examine the machine in place and explain what can be done on the hydraulic, electrical and control side.
  7. 07A solution for the production processWe assess your part, your die and your existing line together, and produce press and automation solutions that will improve your production process.

The job does not end when the press is delivered

From the first quotation to years afterwards

The relationship begins with a quotation: we talk through your part, your material and your cycle target; the technical quotation is prepared with tonnage, bolster and stroke figures. Design, frame manufacture, hydraulic and electrical assembly, software and acceptance testing all run under one roof — your contact does not change at any stage in between.

The file does not close once the press has been installed and commissioned on site and your team has been trained. The economic life of a hydraulic press runs to decades, and throughout that time maintenance, breakdowns, spare parts and modernisation are handled from the same place. When you ask for a spare part, we hold the record of which project the press was calculated for and which part was fitted; older presses still in service go back into production after their hydraulic, electrical and control sides have been renewed. In other words, the relationship is measured not by a sale but by the life of the machine.

The right part, from the right project

Please send us the following when you request a part

Serial number
It is on the machine plate — it lets us match the part to the project
Year of manufacture
If the serial number cannot be read, it narrows down the match
Part description
Its name, its position or, if you have it, the part number
Photograph
A photograph of the part and of the plate speeds up the match

Why an original part

  • On a hydraulic press the cylinders, valves and sealing elements are selected according to the tonnage of the press and its cycle regime.
  • An equivalent part may work in the short term.
  • But it can change the cycle time, the oil temperature and the behaviour of the safety functions.
  • For a spare part, we hold the record of which project the press was calculated for and which part was fitted.

Create a service request

If production has stopped, please also call +90 212 550 48 06 — the form opens a record, the call gets the team moving straight away.

The team and the route are planned accordingly.

Production status

Describe the symptom as it is; our team will make the diagnosis.

Optional — it speeds the service up

It is written on the machine plate. If you cannot find it, leave it blank.

JPEG, PNG or WebP · at most 8 MB per file. The location and device information (EXIF) in the images is deleted before they are stored. You can send documents by e-mail.

Your data is processed solely to assess your service request, to plan the site visit and to get back to you.

+90 212 550 48 06ozkoc@ozkoc.com.tr · satis@ozkoc.com.tr · export@ozkoc.com.trÖmerli Mah. Hadımköy-İstanbul Cad. No:196, 34555 Arnavutköy/İstanbul07:00–17:00 (UTC+3)
ÖZKOÇ Hadımköy factory — 35,000 m² site
Hadımköy plant · 35,000 m²

Request a quote.

Write to us with your press type, your tonnage requirement and your process; the technical quotation is prepared with tonnage, bolster and stroke figures.

Knowing your existing line helps us settle the right tonnage and the number of stages more quickly.

The clearer the part and process information, the more accurate the quotation.

JPEG, PNG or WebP · at most 8 MB per file. The location and device information (EXIF) in the images is deleted before they are stored. You can send technical drawings and CAD files by e-mail.

Your data is processed solely to prepare a technical quotation for your request and to get back to you.

Is something broken down? Create a service request

Get in touch

Which channel

ozkoc@ozkoc.com.tr
Domestic sales, service and spare parts
satis@ozkoc.com.tr
Sales and quotation requests
export@ozkoc.com.tr
Export and overseas projects
+90 212 550 48 06
Switchboard — weekdays 07:00–17:00 (UTC+3)