Presses
ÖZKOÇ Hidrolik has manufactured hydraulic presses in İstanbul (Hadımköy) since 1964, from 70 to 7,000 tonnes; all 16 press families are on this page, grouped by industry. On frame types: C-frame hydraulic press · H-frame hydraulic press. New to presses? What is a hydraulic press and how does it work? All manufacturing under one roof: hydraulic press manufacturing.
Your series volume and your cycle time target determine the size of the press. Come to us with the part drawing, the material type and the annual quantity.
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Fuel tank half-shells
- Exhaust heat shield
- Oil filter housing
- +4
COLDHydraulic Forming Press
Single-acting hydraulic forming press — no blank holder; for shallow forming, bending, embossing and sizing work. The force is obtained at any desired point of the stroke.
- Sheet metal reinforcement parts
- Inner panel forms
HOTSMC & BMC Press
A hot hydraulic press that forms glass-fibre reinforced thermoset compounds — SMC sheet and BMC bulk — by curing them under pressure in a heated mould.
- Tractor bonnet and panels
- Bus front panel
- Composite body panels
- +2
HOTSilicone Curing Press
A hot hydraulic press that turns solid silicone compound into the finished part by vulcanising it under pressure in a heated mould.
- Silicone gaskets and bellows
- Heat-resistant sealing elements
HOTBrake Lining Curing Press
A hydraulic press that cures the resin-based friction mix of a brake lining under pressure in a heated mould.
- Disc pads and drum brake linings
- Industrial friction linings
- Friction elements
TRANSFERHydraulic Transfer Press
A hydraulic transfer press that brings every step of a part formed in several stages together in a single machine — the part is carried automatically between the stations and one finished part comes off with every press stroke.
- Brackets and fasteners
- Horn body
- Filter body
- +1
HOTComposite Press
A hot hydraulic press that consolidates technical materials such as prepreg, organosheet, ballistic composite and PEEK in a mould with a controlled heating–cooling cycle.
- Structural composite reinforcement parts
- Battery housing
- Underbody protection panel
- +1
COLDHydraulic Cutting Press
A hydraulic cutting press that absorbs the shock at the moment of cutting with counter-pressure cylinders — its real work is cutting; flange trimming and bending are done in the same frame as well.
- Flange trimming of a drawn sheet metal part
- Edge bending
- Preparing the mounting face
SPECIALPowder Compacting Press
Powder compacting press — it compacts a blend of dry powder and granulate in the die and turns it into a green part ready for the furnace; salt cores, zirconia blocks and glass mosaic are pressed on the same class of machine.
- Salt core for piston cooling galleries
- Casting cores with complex galleries
HOTRubber Curing Press
A hydraulic press that vulcanises the rubber compound under pressure in a heated mould; on metal-reinforced parts the bond is formed in the same cycle.
- Vibration isolation mount
- Rubber-to-metal bonded mounts and bushes
Whether you process composite or sheet metal changes the press completely. We start from the material recipe and the die size.
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Protective vessel body
HOTSMC & BMC Press
A hot hydraulic press that forms glass-fibre reinforced thermoset compounds — SMC sheet and BMC bulk — by curing them under pressure in a heated mould.
- Composite housing and lid
- Lightweighted structural part
HOTBallistic Plate and Helmet Press
A hot hydraulic press that cures ballistic protection plates, helmets and chest–arm–shoulder protection parts under pressure between heated platens.
- Ballistic protection plates
- Chest protection plate
- Arm and shoulder protection part
- +5
HOTLaboratory Press
A laboratory press does not carry out the test — it produces the sample to be tested; by recording at which temperature, pressure and time the best part comes out, it gives you the recipe for series production.
- Material development samples
- Composite recipe trials
- Pre-series part
TRANSFERHydraulic Transfer Press
A hydraulic transfer press that brings every step of a part formed in several stages together in a single machine — the part is carried automatically between the stations and one finished part comes off with every press stroke.
- Bomb body preform
- Protective vessel body
HOTComposite Press
A hot hydraulic press that consolidates technical materials such as prepreg, organosheet, ballistic composite and PEEK in a mould with a controlled heating–cooling cycle.
- Lightweighted structural part
- Composite housing and lid
Drawing depth and sheet thickness are decisive. It is enough to know the deepest point of the part and in how many stages it is drawn.
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Sink bowls
- Pot and pan bodies
- Teapot body
- +2
COLDHydraulic Forming Press
Single-acting hydraulic forming press — no blank holder; for shallow forming, bending, embossing and sizing work. The force is obtained at any desired point of the stroke.
- Cooker hood body
COLDCoining Press
Coining press — work hardening and chipless sizing by cold coining; a rigid frame at high tonnage, with the force applied smoothly and under control.
- Aluminium pan and pot bodies
- Sized kitchen utensils
SPECIALHydraulic Casting Press
A hydraulic casting press developed by Özkoç itself, turning molten aluminium into a part by pressing it in an open mould — the low-tonnage, low-scrap alternative to aluminium metal injection.
- Cast aluminium bodies to be coated with Teflon or paint
HOTSilicone Curing Press
A hot hydraulic press that turns solid silicone compound into the finished part by vulcanising it under pressure in a heated mould.
- Silicone bakeware moulds
- Silicone parts for kitchen utensils
- Gaskets and handles
HOTMelamine Press
A hot hydraulic press that cures melamine and resin-based thermoset compounds in a heated mould to press tableware, panels and sanitary ware.
- Melamine plates, bowls and serving sets
- Kitchen and tableware
COLDHydraulic Cutting Press
A hydraulic cutting press that absorbs the shock at the moment of cutting with counter-pressure cylinders — its real work is cutting; flange trimming and bending are done in the same frame as well.
- Trimming the sink flange
- Sink flange trimming and edge curling
- Truing the rim of a pot
- +1
TRANSFERHydraulic Transfer Press
A hydraulic transfer press that brings every step of a part formed in several stages together in a single machine — the part is carried automatically between the stations and one finished part comes off with every press stroke.
- Pot and pan bodies
- Teapot body
- Sink bowls
- +1
Thickness, the cutting or forming force and the batch size. If you have a sample part, that is the quickest route.
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Deep vessel forms
- Cylindrical bodies
- Sheet metal parts drawn in several stages
- +3
COLDHydraulic Forming Press
Single-acting hydraulic forming press — no blank holder; for shallow forming, bending, embossing and sizing work. The force is obtained at any desired point of the stroke.
- Forming with a spring-loaded die
- Truing and sizing
- Multi-cavity die work
- +1
COLDHydroforming Press (T-Fitting Press)
Hydroforming (T-fitting) press — a hydraulic press that forms weld-free, seamless T-fittings by applying fluid pressure to the inside of the tube.
- Seamless T (branch) forming
- Thin-walled hollow parts
COLDCoining Press
Coining press — work hardening and chipless sizing by cold coining; a rigid frame at high tonnage, with the force applied smoothly and under control.
- Cold coining of solid steel parts
- Surface patterning and marking
SPECIALHydraulic Casting Press
A hydraulic casting press developed by Özkoç itself, turning molten aluminium into a part by pressing it in an open mould — the low-tonnage, low-scrap alternative to aluminium metal injection.
- Aluminium cast parts pressed in an open mould
HOTLaboratory Press
A laboratory press does not carry out the test — it produces the sample to be tested; by recording at which temperature, pressure and time the best part comes out, it gives you the recipe for series production.
- Die and recipe trials
- Small-batch R&D work
COLDHydraulic Cutting Press
A hydraulic cutting press that absorbs the shock at the moment of cutting with counter-pressure cylinders — its real work is cutting; flange trimming and bending are done in the same frame as well.
- Cutting thick sheet
- Cold-rolled (DKP) and stainless steel sheet parts
- Small-batch cutting work
TRANSFERHydraulic Transfer Press
A hydraulic transfer press that brings every step of a part formed in several stages together in a single machine — the part is carried automatically between the stations and one finished part comes off with every press stroke.
- Fire extinguisher body
- Cylindrical housing
- Deep vessel forms
- +1
SPECIALPowder Compacting Press
Powder compacting press — it compacts a blend of dry powder and granulate in the die and turns it into a green part ready for the furnace; salt cores, zirconia blocks and glass mosaic are pressed on the same class of machine.
- Soluble cores for hollow castings
- Cores for series casting lines
Most jobs start from the die size; the dimensions of the panel or profile and the daily quantity are enough.
COLDHydroforming Press (T-Fitting Press)
Hydroforming (T-fitting) press — a hydraulic press that forms weld-free, seamless T-fittings by applying fluid pressure to the inside of the tube.
- Plumbing tees and elbow fittings
- Pipe fittings
- Sanitary plumbing parts
HOTBrake Lining Curing Press
A hydraulic press that cures the resin-based friction mix of a brake lining under pressure in a heated mould.
- Brake linings for construction machinery and cranes
- Heavy-duty friction elements
HOTMelamine Press
A hot hydraulic press that cures melamine and resin-based thermoset compounds in a heated mould to press tableware, panels and sanitary ware.
- Toilet seats and sanitary products
- Melamine-faced surface panels
- Decorative laminate elements
HOTRubber Curing Press
A hydraulic press that vulcanises the rubber compound under pressure in a heated mould; on metal-reinforced parts the bond is formed in the same cycle.
- Elastomeric bearing
- Building expansion joint and sealing profiles
- Vibration isolation mount
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Airport and façade sheet metal cladding panels
SPECIALPowder Compacting Press
Powder compacting press — it compacts a blend of dry powder and granulate in the die and turns it into a green part ready for the furnace; salt cores, zirconia blocks and glass mosaic are pressed on the same class of machine.
- Glass mosaic tiles
- Pool and façade mosaics
- Decorative cladding elements
- +1
Surface finish and repeatability come first; tell us your material and tolerance expectations from the outset.
COLDDeep Drawing Press
Deep drawing press — it draws sheet metal into seamless vessel and body forms; the blank holder prevents wrinkling, and the blank holder force and the drawing speed are adjusted independently of each other.
- Stainless steel surgical bowls and trays
- Sterilisation container
- Medical device housing
SPECIALPowder Compacting Press
Powder compacting press — it compacts a blend of dry powder and granulate in the die and turns it into a green part ready for the furnace; salt cores, zirconia blocks and glass mosaic are pressed on the same class of machine.
- Zirconia blocks for dentistry
- Zirconia discs milled on a CAD/CAM machine
- Technical ceramic green part
The cure temperature and cure time of the insulating material determine the heating arrangement of the press.
HOTSMC & BMC Press
A hot hydraulic press that forms glass-fibre reinforced thermoset compounds — SMC sheet and BMC bulk — by curing them under pressure in a heated mould.
- Outdoor electrical enclosure
- Switchgear enclosures and insulators
- Meter boxes
- +1
HOTSilicone Curing Press
A hot hydraulic press that turns solid silicone compound into the finished part by vulcanising it under pressure in a heated mould.
- Silicone insulator
- Cable termination
- High-voltage insulation parts